
Add to Cart
MT200 6pin with multiple connectors support real time tracking,history trace,geo fence,driving behavior,tamper alarm,towing alarm and analog input.More effictive,faster positioning,more steable and mini size for hidden.
When the battery voltage on the vehicle is too low (0-11V or 19-22V), device will report a low voltage alarm to the backend
When the vehicle speed is higher than the preset alarm value, the device will notify the backend. Similarly, when the vehicle speed is lower than preset alarm value, a low speed alarm will be uploaded to the backend, this value is configurable.
The device is built in with G-sensor, which can detect speeding, hard deceleration, hard acceleration and Cornering alarm
When the device detects that the GPS module is working abnormally, it reports the GPS receiver failure alarm to the backend.
Device is with built in light sensor, when it detects the lights vary, it will report removal alarm to the backend
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
GPS chip | Quectel MC25 | |
Bluetooth | Bluetooth 5.0 | |
Power | Input voltage | 9-90V |
Battery | NI-MH AAA 3.6V/60mA,1.5hours working time based on 2-3 minutes upload | |
Power consumption | Average Current: <30mA (DC 12V) Maximum current: <10mA (DC 12V) | |
Interface | Digital input(2) | Ignition detect and Air condition status detect |
Digital output(1) | Relay | |
Anolog input 1 | Voltage range:0-36V | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: GSM | |
Memory | 1000 packets | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP65 |
Pin No | Color | Pin Name | Description |
1 | Red | VCC | Power |
2 | Black | GND | Ground |
3 | Orange | ACC | Ignition |
4 | Yellow | Lock | Relay |
5 | White | IO | AC |
6 | Green | ADC | Analog fuel |