Shenzhen Kingwo IoT Co.,Ltd
Kingwo will provide professional services and products based on customer-oriented, and continuously create value for clients.
Add to Cart
NT36AE AGPS GPS LBS car position multiple protocol position module alarm hot sales GPS device
● MT36 is a special positioning product
● Can switch between wired and wireless
● Built-in 5200mAh polymer lithium battery, real-time positioning is used when wiring.
● Support satellite positioning, AGPS positioning, base station positioning, etc.
● Communication support: GSM and GPRS.
● Expansion interface, can access tire pressure sensor,temperature sensor, load sensor, door sensor, pressure switch, etc.
● Support remote firmware upgrade.
● Support multiple protocols, compatible with multiple standard platforms.
● IP68 highest waterproof.
| Product features | Description |
| Working voltage | DC 9V~36V,Suitable for 12V/24V vehicles |
| Working current | Average current<100mA@12V |
| Main power sleep current | <15mA@12V |
| Battery sleep current | <300uA@3.7V(Long sleep mode) |
| Inside battery | Polymer lithium,3.7V/5200mAH |
| Charge | Inside battery support fast charge |
| Communication Type | 2G:GSM/GPRS 850/900/1800/1900MHz |
| Location type | Support Beidou/GPS dual-mode positioning, AGPS assisted positioning and LBS positioning |
| Built-in antenna | Built-in GSM antenna and positioning antenna |
| Data storage | 4MB FLASH(Optional) |
| I/O interface | 2 input,1output |
| AD interface | 2 ADC input,input voltage 0~5V |
| UART interface | 2 RS232&1 RS485 |
| Remote upgrade | Support remote FOTA upgrade firmware |
| Wake up | Timed wake up, open box alarm wake up |
| Open box alarm | Support unpacking wake-up alarm |
| Dual link | Support multi-IP multi-link simultaneous connection |
| Size | 120mm*70mm*50mm |
| Temperature range | Working temperature:-25℃~70℃； Storage temperature:-40℃～+85℃； |
| Protection level | IP68 |
| Basic configuration | |
| Item | Description |
| Main device | 1pcs |
| 3P cable | 1pcs |
| Users manual | 1pcs |
| Warranty card | 1pcs |
| Qualified card | 1pcs |
| Optional accessories | |
| Door sensor | |
| Tire pressure sensor | |
| Temperature sensor | |
| Humidity sensor | |
Including timing return, blind zone compensation, speed and mileage statistics, area monitoring and other functions,The system issues positioning instructions, and the terminal returns data including longitude, latitude, speed, direction, and status information.
The vehicle GPS terminal can be set to upload the position and status information of the vehicle to the backend at a certain time or a certain period or at a certain time interval.
When the vehicle enters the curve lane, the terminal detects that the driving direction has a certain angular deviation (default 20 degrees), and a timing feedback message is added to ensure that the driving track is more accurate.
3.1.5 LBS
The terminal uses GPS positioning by default. When the GPS enters the blind zone and cannot be accurately located, the terminal automatically switches to the base station location. The terminal acquires the base station information every 30S and uploads the base station information, the server interprets the specific location.
3.1.6 Main power detection
The terminal detects the main power voltage in real time. When the battery voltage on the vehicle is too low, the vehicle terminal reports a low voltage alarm to the monitoring center.
3.1.7 Over speed alarm
When the vehicle speed is higher than the over speed alarm value, the vehicle-mounted terminal will notify the monitoring center.
3.1.8 Main power failure alarm
When the main battery of the vehicle is damaged or cannot supply power, the built-in backup power supply can keep the system working and send a power failure alarm to the monitoring center.
3.1.9 Built-in battery
The terminal has a built-in large-capacity high-temperature lithium battery, which can detect the battery power in real time and report the battery power in real time. When the built-in battery is working, the terminal has a variety of working states, which can support the terminal to work continuously for no less than 7 days.
3.1.10 Fast charge
The terminal has a fast charging function. When the main power has power, the built-in battery can be quickly charged through the fast charging module.
3.1.11 Power saving function
The terminal has a built-in G-Sensor, which can automatically detect the current state of the device and distinguish between sports mode and static mode; when the terminal is in static mode for a period of time, the terminal can automatically enter the power saving mode, and the uploaded data will be converted to heartbeat feedback; After the G-Sensor detects that it enters the sports mode in real time, the terminal immediately exits the power saving mode and enters the normal working state.
3.1.12 Intelligent self-check
The vehicle-mounted terminal can perform self-diagnosis. Once a fault occurs, it will send a fault notification to the center, such as GPS, GSM, etc., and can automatically take relevant measures. The monitoring center can also query the terminal's current model, version, configuration, operating status, and equipment functions.