Shenzhen Kingwo IoT Co.,Ltd
Kingwo will provide professional services and products based on customer-oriented, and continuously create value for clients.
Add to Cart
NT07EG is a 4G Lte Exceptional Long Battery Life Accurate Location Report Excavator GPS Tracker , the device has 8100 mah battery built in and equipped with high gain GPS for accurate position, device is able to work 5 years if upload data once a day.
Features:
1. Long battery life
2. Accurate position
3. Temperature sensor
4. Vibration alarm
5. Warehouse mode
6. Tamper alarm
7. Portable and easy to use
8. AGPS, WIFI,LBS,WIFI
Specifications:
| Physical | Dimension | 81mm*51mm*31mm(L*W*H) |
| Weight | 192±4g | |
| Cellular | Communication module | Quectel BG95 M3 |
| Frequency | Working frequency: • Cat M1: LTE-FDD B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 | |
| GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
| Power | Battery | Disposable Lithium-ion battery and (3.6V,5400Mah or 8100mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current <7uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim | |
| Indicator | 2 status LEDs, Green: GPS, Red:Celluar | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP67 | |
| More features: |
• Connection time out
Normally the maximum duration time of each wake-up of the device is 15 minutes.
• Automatic APN adpat
The device has APN adapt features, however if APN is not in APN adapt list, APN configuration is required.
• OTA commands from backend
Since the wake up of the device is short, it is hardly to receive SMS , to ensure the command sending efficiently, we suggest an OTA commands to be sent from the platform, when the device is online, the backend will automatic send this command, to make sure the commands is properly received.
• Removal alarm
There is a high sensitive light sensor at the bottom, if the device is tampered, either the device is working or in sleep mode, it will be activated and enter into anti-removal status and switch on anti-removal alarm, and report the alarm info to the backend or preset phone number.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.